Quote:
Originally Posted by Sleepy
gantua, could you post/send some links on what you did to your xbox with the hardware needed?
|
Sure thing
Llamma's Xbox 360 3RLOD (three red light error) X-Clamp Fix X-Clamp-Fix - X-Clamp-Fix DIY Kit X-Clamp-Fix
Here are the official home depot part numbers:
Qty - 8 Machine Screw Pan - Phillips 5 x 10mm (DR# - 313) UPC - 030699 801282
Qty - 16 Flat Washer Nylon #10 (DR# - 610) UPC - 030699 869381
Qty - 16 Flat Washer Steel / ZINC Plated 5mm (DR# - 606) UPC - 030699 363087
You will also need a Torx 8 and 10 screwdriver and a tube of AS5 which you can get at Radio Shack or any computer store.
Lots of guides on youtube, lots of BS too. When you remove the thermal compound on disassembly take your time...if it's like mine it was a biznatch to get off.
Take your time, and be careful but don't be too paranoid the mobo is tougher than it looks just remember the rules about static discharge and such.
Plan ahead! If you do the washer fix decide up front whether or not you want to run your machine screws through the case which will require you to drill the aluminum case slightly or be a dumbass like myself and have to drill huge ass holes in the case because I didnt think it through and the mobo wouldnt lay flat in the case with those larger headed screws on the bottom of the mobo. I hope that answers some questions if you need some more just holler or pm me I'll be glad to help.